I had experience printing with a beta-version resin printer, but it would take hours and the results were less than satisfactory for what I was trying to print (not to mention the cost of resin), so I decided to get a second printer. I desired one which could give professional results and cost less than $1500. After much frustration with what was out there, I finally found the Dremel 3D40 and it seemed to have decent reviews...most importantly, however, the reviews emphasized the excellent tech support (whereas other printers had limited, uncaring, or no tech support). I purchased one in November of 2016. I am glad I did, and I would like to explain why.
Firstly, many of the reviews on 3D printers are written by people who seem to think that 3D printing is a matter of "pushing a button and having a perfect print magically appear". such is not the case; 3D printing is a "black art" of sorts, and how any given model is designed and laid out is as important as how well the printer works. It took a few weeks before I figured out some of the secrets. The Print Studio software (which is available to download with purchase) is actually not half-bad software! Once one gets the hang of tweaking the settings (hint: always enable the raft!), it nearly always yields successful prints! The few non-successful prints I had were more a matter of how my model was designed and laid out in the print software...once I reworked the model in question, prints were universally successful! One complaint I read is that the 3D40 can only be used with Dremel filament. I have read numerous accounts of people using other filaments with this printer, but I personally have no problem whatsoever with the Dremel filament. One spool lasts a surprisingly long time! There have been occasions where I needed to contact tech support, and I would like to mention that they are quite possibly the BEST tech support team I have yet encountered. Yes, they will get back to you, and yes they have solved every problem I have had. The most common problem is an occasional clogged print head, and they have excellent directions which will allow you to make the repair at home (I have had to do this once since I purchased the printer). It is otherwise easy to maintain. I did have a problem with the leveling mechanism; they gave me excellent instructions on sending the printer in for repair/replacement of the defective component. The turnaround time was about one week (including shipping time). Again, save the box and material the printer came in just in case it is needed! Print time is relatively fast (my prints took anywhere from under 20 minutes to about 12 hours for a large, complex print; the resin printer takes FAR longer). Another complaint I've read on the 3D40 is that there is no heated print bed. While this might be an improvement for future models, I have had no problems with removing prints. As long as the glass is covered (either by Dremel's prepared stick-on surfaces or by blue painter's tape), prints can be easily removed. Finally, the filament yields a very nice matt, shine-free print. I use white filament, and I find that it takes primer and paint very well. Plastruct Plastic Weld (with the orange label and NOT the white label) has proven to be an excellent and strong adhesive. Filament is readily available and not that expensive at all. In conclusion, I strongly recommend this printer, if only for the tech support. The only improvements I can think of (other than the heated print bed) is better instructions for the Print studio software. Though it is simple enough software, it has a LOT of parameters which might need to be adjusted to yield the best results. I give the Dremel 3D40 five stars and tech support six stars (out of five)!
There is a newer version of this item:
Customers who viewed this item also viewed
Page 1 of 1 Start overPage 1 of 1
From the manufacturer
The Dremel 3D40 is the most reliable & easiest-to-use 3D printer
|
|
|
|
|---|---|---|
Unsurpassed ReliabilityThere is nothing worse than a clogged 3D printer. Based on Dremel's proprietary sensor technology, the 3D40 is engineered to run as smooth as butter and resist clogging. We want you to make, not repair. |
Get Started ImmediatelyDremel's 3D40 is fully enclosed and has optimized motion controls to minimize noise so you can continue with your day while the printer is running. Installation is a breeze since time to 1st print takes only 15 minutes. |
Award-Winning ExperienceDremel's 3D40 has won an ISTE award as it is the perfect solution for all types of users, from middle school teachers to engineers. Try a 3D40 out for yourself and see what all the excitement is about. |
|
|
|
|
|
|---|---|---|---|
Wifi-Enabled for Cloud PrintingEvery 3D40 3D printer is wifi-enabled and part of the Dremel Print Cloud. We also have Dremel DigiLab 3D Slicer - based on Cura - for users wanting a desktop solution. |
Semi-Automated LevellingThe 3D40 incorporates smart sensor technology, allowing effortless, accurate calibrations, and easy set-up. The touch screen shows you in real time how to precisely level the plate with just the turn of a knob. |
Industry's 1-Year WarrantyOn the off-chance that something goes wrong with your 3D40 3D printer, rest assured that we will have your 3D printer fixed in no time at no cost to you. Know more in our official website. |
PLA FilamentDremel’s non-toxic, recyclable, plant-based PLA filament is safe to use in class or at home. It has been engineered for optimal printing, producing a stable, strong object with a high-quality finish. |
Support By Your Side :
Our entire customer support team is located in Racine, Wisconsin. With the same standards as our rotary tool business, our average call pickup time is less than 45 seconds. Isn't it nice to work with a company that is there for you when you need them?
More Than Just A 3D Printer
We made sure to include everything needed to easily get started with 3D printing. In addition to our reliable & easy-to-use 3D printer, you will get our:
- Free cloud-based slicing software
- 1-year warranty
- World-class customer support
- UL safety certification to allow you to print overnight without anxiety
|
|
|
|
|
|---|---|---|---|---|
| 3D45-01 | 3D40- EDU | 3D40-01 | 3D20-01 | |
|
|
|
|
||
| Customer Reviews |
586
|
46
|
110
|
795
|
| Price | $1,999.00 | — | — | — |
| Recommended Use | Advanced 3D Users in industry, Higher Education, and High School for Engineering and Product Development | Beginner K-12 Education Institutions that want help getting started with 3D printing | Beginner and Intermediate K-12 Eduation Institutions for Hands-on, Project-Based Learning | Tinkerers, Hobbyists, & Home Users |
| Build Volume | 10 x 6.0 x 6.7 in | 10 x 6.0 x 6.7 in | 10 x 6.0 x 6.7 in | 9.0 x 5.9 x 5.5 in |
| Wifi-Enabled for Cloud Printing | ✓ | ✓ | ✓ | |
| Filament Type(s) Used | Nylon, eco-ABS, PLA | PLA | PLA | PLA |
| Heated Build Plate | ✓ | |||
| Build Plate Material | Glass | Glass | Glass | Acrylic |
| Build Plate Leveling | Semi-Automated | Semi-Automated | Semi-Automated | Manual |
| Warranty and Support | 1-Year with Infinite Customer Support | 1-Year with Infinite Customer Support | 1-Year with Infinite Customer Support | |
| 4 Hours of Professional Development Credit | ✓ | |||
| Filament Rolls Included | 1 Nylon, 1 Eco-ABS | 4 PLA | 1 PLA | 1 PLA |
Videos
Page 1 of 1Start OverPage 1 of 1
Videos for this product
0:12
Click to play video
Customer Review: It is easy to load and change filament
Sunny Tee
Reviews with images
YOU THOUGHT DREMEL ONLY MADE MOTO TOOLS....
I will never buy any other printer! I started 3D printing using a Dremel 3D20model and traded that in for a 3D40 model when Dremel released that version.While I was absolutely pleased with the 3D20. I bought the 3D20 based on priceand research. I wasn't about to pay $3,000 dollars and up just to make items. Dremel made an affordable and easy to use 3D printer with the models that they have released. The printer is extremely easy to use, you do notneed a degree in CAD to start printing as they have partnered with Simplify 3Dwhich is a program that does magic with print files. The 3D40 is easy to levelas it is almost self leveling, by just adjusting 2 dials, and the printer willtell you when it's level. Filament is easy to load from the side of the machine.It evens stops printing when you run out of filament, and the printer willresume at the point it ran out. A nice feature to have when you're printing alarge model overnight.I now have 3 3D40 printers that I almost run 24 hours a day without any issues,other than normal wear and tear of parts. Dremel is AMERICAN MADE, and theirheadquarters and service department is located in Racine Wisconsin. The peoplein service are tremendous, knowledgeable, fast and efficient with any of the fewrepairs that I have needed.I print model tanks, cars, and trucks from the WW I era to current on the internet.Following is a review a customer just left for me:"Great piece!!!Very excited about the pieces I have ordered from this source. The pieces alwaysare packed great, look fantastic, as they are made to order every corner andfitting are terrific. The items always have a very realistic design, what elsecan I say. Tanks a lot! :-)"Dremel is the printer you need to buy to start your journey in the world of 3Dprinting.
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
Reviewed in the United States on June 8, 2017
Reviewed in the United States on August 31, 2017
model and traded that in for a 3D40 model when Dremel released that version.
While I was absolutely pleased with the 3D20. I bought the 3D20 based on price
and research. I wasn't about to pay $3,000 dollars and up just to make items. Dremel made an affordable and easy to use 3D printer with the models that they have released. The printer is extremely easy to use, you do not
need a degree in CAD to start printing as they have partnered with Simplify 3D
which is a program that does magic with print files. The 3D40 is easy to level
as it is almost self leveling, by just adjusting 2 dials, and the printer will
tell you when it's level. Filament is easy to load from the side of the machine.
It evens stops printing when you run out of filament, and the printer will
resume at the point it ran out. A nice feature to have when you're printing a
large model overnight.
I now have 3 3D40 printers that I almost run 24 hours a day without any issues,
other than normal wear and tear of parts. Dremel is AMERICAN MADE, and their
headquarters and service department is located in Racine Wisconsin. The people
in service are tremendous, knowledgeable, fast and efficient with any of the few
repairs that I have needed.
I print model tanks, cars, and trucks from the WW I era to current on the internet.
Following is a review a customer just left for me:
"Great piece!!!
Very excited about the pieces I have ordered from this source. The pieces always
are packed great, look fantastic, as they are made to order every corner and
fitting are terrific. The items always have a very realistic design, what else
can I say. Tanks a lot! :-)"
Dremel is the printer you need to buy to start your journey in the world of 3D
printing.
YOU THOUGHT DREMEL ONLY MADE MOTO TOOLS....
Reviewed in the United States on August 31, 2017
I will never buy any other printer! I started 3D printing using a Dremel 3D20Reviewed in the United States on August 31, 2017
model and traded that in for a 3D40 model when Dremel released that version.
While I was absolutely pleased with the 3D20. I bought the 3D20 based on price
and research. I wasn't about to pay $3,000 dollars and up just to make items. Dremel made an affordable and easy to use 3D printer with the models that they have released. The printer is extremely easy to use, you do not
need a degree in CAD to start printing as they have partnered with Simplify 3D
which is a program that does magic with print files. The 3D40 is easy to level
as it is almost self leveling, by just adjusting 2 dials, and the printer will
tell you when it's level. Filament is easy to load from the side of the machine.
It evens stops printing when you run out of filament, and the printer will
resume at the point it ran out. A nice feature to have when you're printing a
large model overnight.
I now have 3 3D40 printers that I almost run 24 hours a day without any issues,
other than normal wear and tear of parts. Dremel is AMERICAN MADE, and their
headquarters and service department is located in Racine Wisconsin. The people
in service are tremendous, knowledgeable, fast and efficient with any of the few
repairs that I have needed.
I print model tanks, cars, and trucks from the WW I era to current on the internet.
Following is a review a customer just left for me:
"Great piece!!!
Very excited about the pieces I have ordered from this source. The pieces always
are packed great, look fantastic, as they are made to order every corner and
fitting are terrific. The items always have a very realistic design, what else
can I say. Tanks a lot! :-)"
Dremel is the printer you need to buy to start your journey in the world of 3D
printing.
Images in this review
